Training Dates | Page 3 of 36

Vehicle Banksman- Wirral

£90.00

Vehicle Banksman:
This course aims to instruct you as an operative to safely conduct vehicle signalling operations. Who Should Attend? Any person who as part of their work duties may need to direct traffic. What Will I Learn? At the end of the course you will be able to: Identify relevant legislation and guidance Correctly demonstrate approved signals Identify hazards associated with signalling operations Explain why effective communication is needed between driver and banksman.
Course Content:

Introduction and Aims Regulations What is a Banksman Understanding the Roles of the Driver & Banksman Understanding the Key Issues arising out of Reversing & Manoeuvring Vehicles Identify Danger Areas When Manoeuvring Vehicles Demonstrate recommended Signals Theoretical & Practical Assessments

Select options Details
A31 Ride on Roller (Experienced)- 2 day Brownhills (non levy)

£1,240.80
Pre-course Requirements
Delegates must have passed the appropriate HS&E test within the last two years prior to attending this course
Course Overview
The A31 Ride on Roller course is delivered through a combination of classroom-based learning and practical training.
Course Structure

All pre-start, running checks and shut down procedures

Set roller for travel

Awareness of on-site hazards

Set the roller for compaction duties

Place roller in an out of service condition

Recognise compacted/uncompacted areas

Conditions that may cause instability of the roller

Safety procedures when working up to unsupported edges

Loading and unloading procedures on/off a transporter
Select options Details
A31 Ride on Roller (Novice)- 4 day Brownhills (non levy)

£1,812.00
Pre-course Requirements
Delegates must have passed the appropriate HS&E test within the last two years prior to attending this course
Course Overview
The A31 Ride on Roller course is delivered through a combination of classroom-based learning and practical training.
Course Structure

All pre-start, running checks and shut down procedures

Set roller for travel

Awareness of on-site hazards

Set the roller for compaction duties

Place roller in an out of service condition

Recognise compacted/uncompacted areas

Conditions that may cause instability of the roller

Safety procedures when working up to unsupported edges

Loading and unloading procedures on/off a transporter
Select options Details
A58 Excavator 360 above 10 tonne (Experienced)- Aylesbury

£954.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 above 10 tonne (Novice)- Aylesbury

£2,154.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 above 10 tonne (Semi-Experienced)- Aylesbury

£1,194.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 below 10 tonne (Experienced)- Aylesbury

£954.00
Course Details

Define roles and responsibilities of a 360 excavator below 10 tonnes operator

Understand fully excavator controls and terminology utilised by a competent operator

Maintain safe working conditions of an excavator operator

Explore and analyse important legislation, guidance, and regulations

Carry out pre-use checks and check equipment for function and serviceability

Display the ability to use the machine to safely traverse over rough and undulating ground, as well as sizable inclines and level surfaces

Operate and manoeuvre safely and efficiently within confined spaces

Excavate differing types of excavations in diverse ground conditions

Load and safely place various materials into vehicles/hoppers for transport

Plain, spread, level and grade various ground materials

Understand manufacturer requirements in order to attach and remove attachments, such as buckets

Safely lift, move and place basic slung loads

Demonstrate and safely carry out both shut down and securing procedures

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 below 10 tonne (Novice)- Aylesbury

£2,154.00
Course Details

Define roles and responsibilities of a 360 excavator below 10 tonnes operator

Understand fully excavator controls and terminology utilised by a competent operator

Maintain safe working conditions of an excavator operator

Explore and analyse important legislation, guidance, and regulations

Carry out pre-use checks and check equipment for function and serviceability

Display the ability to use the machine to safely traverse over rough and undulating ground, as well as sizable inclines and level surfaces

Operate and manoeuvre safely and efficiently within confined spaces

Excavate differing types of excavations in diverse ground conditions

Load and safely place various materials into vehicles/hoppers for transport

Plain, spread, level and grade various ground materials

Understand manufacturer requirements in order to attach and remove attachments, such as buckets

Safely lift, move and place basic slung loads

Demonstrate and safely carry out both shut down and securing procedures

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 below 10 tonne (Novice)- Brownhills

£2,094.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 below 10 tonne (Semi-Experienced)- Aylesbury

£1,194.00
Course Details

Define roles and responsibilities of a 360 excavator below 10 tonnes operator

Understand fully excavator controls and terminology utilised by a competent operator

Maintain safe working conditions of an excavator operator

Explore and analyse important legislation, guidance, and regulations

Carry out pre-use checks and check equipment for function and serviceability

Display the ability to use the machine to safely traverse over rough and undulating ground, as well as sizable inclines and level surfaces

Operate and manoeuvre safely and efficiently within confined spaces

Excavate differing types of excavations in diverse ground conditions

Load and safely place various materials into vehicles/hoppers for transport

Plain, spread, level and grade various ground materials

Understand manufacturer requirements in order to attach and remove attachments, such as buckets

Safely lift, move and place basic slung loads

Demonstrate and safely carry out both shut down and securing procedures

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A58 Excavator 360 below 10t (Novice)- Brownhills

£2,094.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details
A59 Excavator 360 above 10 tonne (Novice)- Brownhills

£2,094.00
Course Details

Operate the excavator 360° tracked safely and productively

Fit and operate ancillary equipment

Site the machine safely and efficiently

Carry out minor adjustments and routine servicing procedures

Understand the capabilities, purposes and limitations of each machine

Follow all necessary safety precautions

Interpret the information provided by level pegs and profiles

Be aware of the necessary routine adjustments and service procedures, and carry them out

Work to levels with the aid of laser equipment

Entry Requirements

CITB Health, Safety and Environment test completed and passed within the last two years before the course start date or CPCS test date. A good level of written and spoken English is required to successfully complete this course.
Select options Details

Pre-course Requirements

Course Overview

Course Structure

Pre-course Requirements

Course Overview

Course Structure